# Delete post API Reference

Delete a post from Zernio. Upload quota is automatically refunded for draft and scheduled posts.

Any status except `published` can be deleted:

- `draft`
- `scheduled`
- `publishing`
- `failed`
- `partial`
- `cancelled`

Published posts cannot be deleted; use the Unpublish endpoint instead.

### Stopping pending entries

Deleting a `publishing` or `partial` post is how you stop entries that are still pending, for example entries held on a disconnected account.

It removes the whole post record from Zernio, including the entries that were already published. It does not remove anything already live on a platform (use Unpublish for that first if needed).

An entry that a worker has already started sending when you delete may still go out. It may also fail, because media uploaded to Zernio and not used by another post is deleted with the post.

### Side effects

- Analytics for entries already published are removed too.
- Deleting frees the content for re-creation, so the same caption and media are no longer reported as a duplicate.


## GET /v1/posts/{postId}

**Get post**

Fetch a single post by ID. For published posts, this returns platformPostUrl for each platform.

To wait for a post to publish, subscribe to the `post.published`, `post.failed` and `post.partial` webhooks instead of polling this endpoint. Each event carries the post, so no follow-up read is needed.


### Parameters

- **postId** (required) in path: No description

### Responses

#### 200: Post

**Response Body:**

- **post**: `Post` - See schema definition

#### 400: Invalid request

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 401: Missing or invalid API key. `code` is `missing_credentials` when no Authorization header was sent and `invalid_credentials` when the key is unknown, revoked or expired.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 403: Forbidden

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 404: Resource not found

**Response Body:**

- **error** `string`: No description (example: "Not found")

---

## PUT /v1/posts/{postId}

**Update post**

Update an existing post. Draft, scheduled, failed, partial, and cancelled posts can be edited. Published posts can only have their recycling config and `externalId` updated: to change the text of a live post, use `POST /v1/posts/{postId}/edit`.

To promote a draft to scheduled, send `isDraft: false` together with `scheduledFor` (or `publishNow: true`, or `queuedFromProfile`). If `isDraft` is omitted the post keeps its current draft status, so sending only `scheduledFor` to a draft returns 200 but the post remains a draft.

Non-draft updates run the same per-platform validation as post creation (media requirements, platform-specific field rules, etc.) against the resulting platforms, returning 400 on failure.


### Parameters

- **postId** (required) in path: No description

### Request Body

- **title** `string`: Stored on the post for reference/display only. This field is NOT used as the video title when publishing. To set a YouTube video title, use platformSpecificData.title on the youtube platform target (falls back to the first line of content when omitted).
- **content** `string`: No description
- **mediaItems** `array`: No description
- **platforms** `array`: Target platforms and accounts for this post. Each item must include platform and accountId.
- **scheduledFor** `string`: No description
- **publishNow** `boolean`: No description
- **isDraft** `boolean`: When omitted, the post keeps its current draft status. Send `false` to promote a draft to scheduled (combined with `scheduledFor`, `publishNow`, or a queue).
- **requiresApproval** `boolean`: Send true on a draft to submit it for approval: it becomes pending_approval and publishes only after POST /v1/posts/{postId}/review approves it. Cannot be combined with isDraft, publishNow, queuedFromProfile or queueId. Returns 409 when the post is not a draft.
- **timezone** `string`: No description
- **visibility** `string`: No description - one of: public, private, unlisted
- **tags** `array`: No description
- **hashtags** `array`: Stored for reference only. Hashtags are NOT automatically appended to the caption when publishing. Include hashtags directly in the content field (platforms like Instagram only support hashtags as caption text). For YouTube keywords, use the tags field instead.
- **mentions** `array`: No description
- **crosspostingEnabled** `boolean`: No description
- **metadata** `object`: No description
- **externalId** `string,null`: Your own identifier for this post (see `externalId` on create). Send `null` to clear it. Also accepted on published posts.
- **queuedFromProfile** `string`: Profile ID to schedule via queue.
- **queueId** `string`: Specific queue ID to use when scheduling via queue.
- **tiktokSettings**: Root-level TikTok settings applied to the TikTok platforms sent in the same request. Merged into each platform's platformSpecificData, with platform-specific settings taking precedence. Returns 400 if sent without a platforms array.
- **facebookSettings**: Root-level Facebook settings applied to the Facebook platforms sent in the same request. Merged into each platform's platformSpecificData.facebookSettings, with platform-specific settings taking precedence. Returns 400 if sent without a platforms array.
- **recycling**: No description

### Responses

#### 200: Post updated

**Response Body:**

- **message** `string`: No description
- **post**: `Post` - See schema definition
- **warnings** `array[string]`: 

#### 202: Balance billing only. The post was saved, but its X platform found the balance at $0 even after auto top-up.

- The X platform is waiting (`post.platforms[].status: pending`, `errorMessage` says why) instead of publishing.
- It publishes within minutes of the balance being funded.
- It fails with "Your balance was $0" if the balance is still $0 after 24 hours.
- Other platforms in `platformResults` published or failed as usual.

This is not "publishing in progress": send the user to Billing to add funds. Usually the request is refused with 402 `insufficient_balance` before anything is saved; 202 covers a balance that reached $0 during the publish.


**Response Body:**

- **post**: `Post` - See schema definition
- **message** `string`: Human-readable summary of the publish outcome.
- **error** `string`: Present when no platform published. Absent on a partial success. Informational only; the per-platform detail is in `platformResults` and in `post.platforms[]`.
- **platformResults** `array[object]`: Per-platform outcome of the publish attempt. Omitted when the attempt aborted before producing per-platform results (for example the post was already being processed); read `post.platforms[]` in that case.
  - **platform** (required) `string`: Platform slug, matching `post.platforms[].platform`.
  - **status** (required) `string`: Per-platform status: pending, processing, published, failed, cancelled, uploading. (example: "failed")
  - **error** (required) `string,null`: Failure detail for this platform, or null when it did not fail.
- **warnings** `array[string]`: Advisory notices about the post that was still created. Absent when there are none.

#### 207: The post was updated, but the inline publish that followed did not fully succeed.

**207 is a 2xx status**, so `fetch(...).ok` is `true` and axios resolves. Branch on the status code explicitly.

Read `post.status`: `partial` (some platforms published), `failed` (none published, terminal), or `scheduled` (transient errors, platforms reset to `pending`, Zernio retries automatically and this is not a failure). `platformResults` is omitted when the attempt aborted before producing per-platform results; `post.platforms[]` is always present.


**Response Body:**

- **post**: `Post` - See schema definition
- **message** `string`: Human-readable summary of the publish outcome.
- **error** `string`: Present when no platform published. Absent on a partial success. Informational only; the per-platform detail is in `platformResults` and in `post.platforms[]`.
- **platformResults** `array[object]`: Per-platform outcome of the publish attempt. Omitted when the attempt aborted before producing per-platform results (for example the post was already being processed); read `post.platforms[]` in that case.
  - **platform** (required) `string`: Platform slug, matching `post.platforms[].platform`.
  - **status** (required) `string`: Per-platform status: pending, processing, published, failed, cancelled, uploading. (example: "failed")
  - **error** (required) `string,null`: Failure detail for this platform, or null when it did not fail.
- **warnings** `array[string]`: Advisory notices about the post that was still created. Absent when there are none.

#### 400: Invalid request. `code: ACCOUNT_NOTIFICATION_ONLY` means a target account is connected for notifications only (`purpose=notifications`) and cannot publish; reconnect it without the purpose to publish with it.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 401: Missing or invalid API key. `code` is `missing_credentials` when no Authorization header was sent and `invalid_credentials` when the key is unknown, revoked or expired.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 402: Balance billing only. `publishNow: true` targets X, and the balance is at $0 after auto top-up tried the saved card (code `insufficient_balance` or `usage_limit_reached`). The post was not changed. Add funds at `funding_url`, then send the request again.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user
- **funding_url** (required) `string` (uri): Dashboard link to Billing that opens the Add funds drawer (the add-card drawer first when there is no card). Send the user there, then retry.
- **required_cents** `integer`: Only when an item debited later (a phone number's first month, all numbers of the order) is refused: what the balance must hold, in cents.

#### 403: Forbidden. A target `accountId` exists but does not belong to the authenticated user, or is disconnected (`code: ACCOUNT_DISCONNECTED`).

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 404: The post does not exist, or a target `accountId` does not exist (`code: account_not_found`: the account was deleted or reconnected under a new ID, so refresh account IDs from `GET /v1/accounts`).

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 409: Conflict. One of:

- `queue_slot_conflict`: the requested scheduledFor collides with another post already in that slot of the same queue. Choose a different time, omit scheduledFor to let the queue assign the next open slot, or send queueId: null to schedule outside the queue.
- `invalid_resource_state`: requiresApproval was sent on a post that is not a draft.


**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 422: Invalid resource state (`invalid_resource_state`): this team does not retain content and the post text was cleared once publishing finished, so the post cannot be changed or published again. Create a new post instead.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 429: The connected account's upstream platform quota is exhausted. Behavior per platform:

- **Reddit:** rate-limits per connected Reddit user (1000 requests per 10-minute window), shared by every operation on that account. Retry after the window resets; repeated calls while exhausted do not succeed and keep the budget spent.
- **Google Ads:** writes and reports run on one developer token shared by every Google Ads account on Zernio. It holds Standard access (no daily operations cap), so this only happens when Google throttles the token or your ad account.
- **Google Ads envelope:** `code: rate_limited`, `platform: google`, `details.quotaScope: DEVELOPER` (`ACCOUNT` when it is your own ad account's quota), `details.resetsAt` (ISO instant when Google accepts requests again) and `Retry-After` counting down to it. Retrying earlier cannot succeed.
- **YouTube Analytics:** reads (channel-insights, demographics, daily-views, video-retention) use the "Queries per day" quota of the Google Cloud project the account is connected through, shared with other Zernio customers, so a 429 is not your own volume. Resets at midnight Pacific Time.
- **YouTube Analytics envelope:** `code: rate_limited`, `platform: google`, `details.quotaExhausted: true`, `details.quotaScope: DEVELOPER`, `details.resetsAt` and `Retry-After` counting down to it. Retrying earlier cannot succeed.
- **Meta ads:** every Meta throttle (codes 4, 17, 32, 613 and business-use-case codes 80000-80014) returns 429 `rate_limited`, even when Meta answers HTTP 400. `Retry-After` comes from Meta's `x-business-use-case-usage` estimate when sent, else Meta's 60-second minimum (30 seconds for the one-write-per-30-seconds limit on one object).
- **Pinterest ads:** limits per user and app, per category (ads_read, ads_write, ads_analytics). `Retry-After` comes from Pinterest's `x-ratelimit-reset` when sent, otherwise 60 seconds.
- **TikTok ads:** limits per app and per endpoint (per second, minute and day), answering overage with code 40100 or code 40002 `OVER_QPS_LIMIT`. Both return 429 `rate_limited` with `platform: tiktok` and `Retry-After: 10`. Space out bulk reads (e.g. one ad at a time per advertiser) instead of retrying at once.

**TikTok Smart+ review read** (`GET /v1/ads/{adId}/tiktok-smart-plus-review`) has its own stricter TikTok quota. After an overage, Zernio answers 429 for that advertiser and connection without calling TikTok for about 60 seconds, then 120, up to 240 while TikTok keeps refusing, each with up to 10% random jitter.

A successful call holds nothing back; the next overage pauses about 60 seconds again. `Retry-After` is the time left. The advertiser-wide read (`GET /v1/ads/tiktok-smart-plus-reviews`) answers 200 with `retryAfterSeconds` and `refreshState` instead. Keep one request in flight per advertiser there.


**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 503: An upstream service or database is temporarily unavailable. Retry after the indicated delay. A timed-out write may have completed upstream; check its outcome before resubmitting.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

---

## DELETE /v1/posts/{postId}

**Delete post**

Delete a post from Zernio. Upload quota is automatically refunded for draft and scheduled posts.

Any status except `published` can be deleted:

- `draft`
- `scheduled`
- `publishing`
- `failed`
- `partial`
- `cancelled`

Published posts cannot be deleted; use the Unpublish endpoint instead.

### Stopping pending entries

Deleting a `publishing` or `partial` post is how you stop entries that are still pending, for example entries held on a disconnected account.

It removes the whole post record from Zernio, including the entries that were already published. It does not remove anything already live on a platform (use Unpublish for that first if needed).

An entry that a worker has already started sending when you delete may still go out. It may also fail, because media uploaded to Zernio and not used by another post is deleted with the post.

### Side effects

- Analytics for entries already published are removed too.
- Deleting frees the content for re-creation, so the same caption and media are no longer reported as a duplicate.


### Parameters

- **postId** (required) in path: No description

### Responses

#### 200: Deleted

**Response Body:**

- **message** `string`: No description

#### 400: Cannot delete published posts (`code: invalid_resource_state`). Use `POST /v1/posts/{postId}/unpublish` to delete it from the platforms.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 401: Missing or invalid API key. `code` is `missing_credentials` when no Authorization header was sent and `invalid_credentials` when the key is unknown, revoked or expired.

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 403: Forbidden

**Response Body:**

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: No description
  - **message** `string,null`: No description
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array[object]`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
    - **type** `string`: No description - one of: campaign, adset, creative, ad, video, image
    - **id** `string`: Meta object id; for `image` the image hash.
    - **cleanup** `string`: - `deleted`: Zernio deleted it.
- `left_behind`: cleanup could not delete it (Meta refused the delete, or the delete hit a network error), so it still exists.
- `kept`: deliberately not deleted. Either an image (hashes are shared by every upload of the same file), or an object Zernio found by name after Meta lost its answer to the create, which may belong to another request with the same name.
 - one of: deleted, left_behind, kept
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

    - **type** `string`: No description - one of: campaign, adset, creative, ad
    - **parentId** `string`: Where to look for it: the ad set for an ad, the campaign for an ad set, the ad account otherwise.
  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

#### 404: Resource not found

**Response Body:**

- **error** `string`: No description (example: "Not found")

---


# Related Schema Definitions

## PostGetResponse

### Properties

- **post**: No description

## Post

### Properties

- **_id** `string`: No description
- **userId**: No description
- **title** `string,null`: Stored on the post for reference/display only. This field is NOT used as the video title when publishing. To set a YouTube video title, use platformSpecificData.title on the youtube platform target (falls back to the first line of content when omitted).
- **content** `string,null`: Null once publishing finishes when the team does not retain content.
- **contentNotRetained** `boolean`: True when this team does not retain content, so `title`, `content` and every `customContent` are null after publishing. Identifiers and metadata stay.
- **mediaItems** `array`: No description
- **platforms** `array`: No description
- **scheduledFor** `string`: No description
- **timezone** `string`: No description
- **status** `string`: `cancelled` is set by POST /v1/posts/{postId}/unpublish once every platform entry has been removed from its platform (a post with published entries left becomes `partial`); cancelled posts can be edited and rescheduled like drafts. `pending_approval` (set by `requiresApproval: true`) never publishes until POST /v1/posts/{postId}/review approves it. - one of: draft, pending_approval, scheduled, publishing, published, partial, failed, cancelled
- **tags** `array`: YouTube constraints: each tag max 100 chars, combined max 500 chars, duplicates removed.
- **hashtags** `array`: Stored for reference only. Hashtags are NOT automatically appended to the caption when publishing. Include hashtags directly in the content field (platforms like Instagram only support hashtags as caption text). For YouTube keywords, use the tags field instead.
- **mentions** `array`: Stored for reference only. Publishing does not create mentions from this field.
- **visibility** `string`: No description - one of: public, private, unlisted
- **metadata** `object`: No description
- **externalId** `string`: Your own identifier for this post, as set on create or update. Absent when unset. Not unique: filter with `GET /v1/posts?externalId=`.
- **recycling**: No description
- **recycledFromPostId** `string`: ID of the original post if this post was created via recycling
- **queuedFromProfile** `string`: Profile ID if the post was scheduled via the queue
- **queueId** `string`: Queue ID if the post was scheduled via a specific queue
- **profileId** `string`: Profile the post is filed under. Set only on drafts that have no platforms.
- **createdAt** `string`: No description
- **updatedAt** `string`: Last change to the post or to any of its platforms (a publish, a failure, a resolved URL).

## ErrorResponse

Canonical error envelope. `error` is the human-readable message; `type`,
`code`, `param`, `platform`, and `platformError` are top-level siblings
for programmatic handling. For upstream platform failures (`type:
platform_error`), `platformError` carries the provider's raw payload
verbatim (for Meta: `error_subcode`, `error_user_title`, `error_user_msg`).


### Properties

- **error** `string`: Human-readable error message.
- **type** `string`: Error class for programmatic handling. - one of: invalid_request_error, authentication_error, permission_error, not_found, rate_limit_error, platform_error, api_error
- **code** `string`: Stable machine-readable error code.
- **param** `string`: The request field that caused the error, when applicable.
- **docUrl** `string`: Documentation page for resolving the error, when one applies.
- **platform** `string`: Upstream platform (e.g. meta, google, tiktok), present when type is platform_error.
- **platformError** `object`: Raw error payload from the upstream platform, passed through verbatim so
integrators can read provider-specific codes. For Meta this includes
error_subcode, error_user_title, and error_user_msg.

- **provider** `string`: Email API: the mailbox provider the error came from (`google`, `microsoft`).
- **providerError** `object`: Email API: the provider's own error code and message, for support and logs. Branch on `code`, not on this.
  - **code** `string,null`: 
  - **message** `string,null`: 
- **retryable** `boolean`: Email API: whether the same request can succeed if retried (with the same `Idempotency-Key` for sends).
- **requestId** `string`: Email API: the request id, also in the `X-Request-Id` header. Quote it when you contact support.
- **docsUrl** `string`: Email API: where this `code` is documented.
- **details** `object`: Additional structured context for the error (for example field-level validation errors). What it carries depends on the endpoint and platform.

**Meta ads refusals.** The ones customers hit most come back with their own `code` instead of `platform_api_error`, the field to fix in `param`, and an English `details.hint` saying how to fix it. `details.fix` ({ label, url }) links the Meta page that resolves it, when there is one.

The code is picked from Meta's numeric `code` and `error_subcode`, never from the message, so it is the same whatever language Meta wrote `error_user_msg` in. Branch on `code` and show `details.hint`.

- `ad_account_payment_required`: the ad account has no usable payment method (subcode 1815010, 1359188).
- `ad_account_policy_not_accepted`: a business admin has to accept Meta's non-discrimination policy (subcode 2859002, 2859024).
- `lead_ads_terms_not_accepted`: the Facebook Page has not accepted the Lead Ads terms (subcode 1815089).
- `verified_advertiser_required`: the market requires a verified beneficiary and payer; send `regionalRegulationIdentities` (subcode 3858634, 3858636, 3858442, 3858548, 3858495).
- `ad_account_unusable`: the ad account is not active, or the business is restricted from advertising (subcode 1885316, 2446325, and 2490592, 4841021 below).
- `meta_security_check_required`: the Facebook user behind the connection is held at a security check (code 31).
- `meta_action_blocked`: Meta temporarily blocked the Facebook user from this action (subcode 2859015).
- `meta_ad_consent_required`: the Page or Instagram owner chose Meta without ads or less personalized ads (subcode 3858231, 3858412).
- `instagram_account_restricted`: Meta restricted the Instagram account the ad runs as (subcode 2207070).
- `insufficient_permissions`: the ad account cannot use the Instagram account, or the Facebook user has no advertiser permission on the Page (subcode 1815199, 1815202, 1885499, 1341012, and the Advertise permission case below).
- `whatsapp_number_not_linked`: the WhatsApp number is no longer linked to the Page (subcode 2446880).
- `invalid_targeting`: Meta refused the audience or a placement (subcode 1487079, 1870247, 2909035, 1870189, 1870188, 1487756, 1487843, 2490562).
- `post_not_boostable`: Meta does not allow the post to be promoted (subcode 2446187, 2875030, 1487472).
- `budget_too_low`: the budget is below Meta's minimum, which `platformError.error_user_msg` states (subcode 1885272).
- `meta_object_not_accessible`: Meta cannot load an object the request names (wrong ID, deleted, or no access); `platformError.message` names the ID (subcode 33, on ads routes only).

Meta's own error stays in the message and in `platformError`.

**Private replies.** The private-reply endpoint adds:

- `privateReplyConsumed` on a 400: the comment's single reply is already spent.
- `privateReplyOutcome: "unknown"` on a 502: Meta answered a server error and the reply may have been delivered.
- `privateReplyOutcome: "not_sent"` on a 429: Instagram's rate limit refused the reply, so retry later.

**Google quota 429.** On a Google Ads or YouTube Analytics 429, `quotaExhausted: true` marks the failure as Google's own quota, not a Zernio rate limit, so you can keep calling other platforms instead of backing off everywhere. When Google names the scope, `quotaScope` is also set:

- `DEVELOPER`: the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics). Every account on Zernio is affected and there is nothing to change on your side.
- `ACCOUNT`: your own ad account (Google Ads only).

A Meta 429 carries neither field.

**Zernio Google Ads burst-limit 429.** Carries `budgetScope` instead, never `quotaExhausted`. These are Zernio's own limits, applied before the call reaches Google, and both clear within a minute. They are separate axes from `quotaScope`, not the same pool named twice.

- `account`: the limit of 15 requests per minute per connected Google Ads account.
- `user`: the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts.

**Failed Meta ad create** (`POST /v1/ads/create`, `POST /v1/ads/boost`, `POST /v1/ads/ctwa`). Carries `stage` (where it failed), `adAccountId` (on which ad account) and `createdObjects` (every object this request had already created, with what cleanup did to it).

- `left_behind` objects still exist on the ad account (Meta refused the delete, typically on a held account, or the delete hit a network error). Delete them yourself or reuse them.
- `unconfirmedWrite` is set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection, and Zernio could not confirm whether the object exists. Check that parent before creating it again.

**Ineligible ad account: 422 `ad_account_unusable`.** When Meta refuses a write because the ad account's status is ineligible to manage ads (Meta subcode 2490592 or 4841021, on the write itself or on a cleanup delete), any Meta ads write answers it.

That covers create, boost, CTWA, campaign / ad set / ad updates and status changes.

The message names the ad account when known, links Meta's fix (https://www.facebook.com/business/help/422289316306981), lists the objects left behind and ends with Meta's original error, which also stays verbatim in `platformError`.

Meta often reports the first failure under an unrelated code (e.g. 1487194 on the creative), so branch on `code`, not on `platformError`.

**Missing Advertise permission: 403 `insufficient_permissions`.** When the Facebook user behind the connection's token lacks the Advertise permission on the ad account, any Meta ads write answers it.

Triggers: Meta subcode 2490585, 2490591 or 4841020 on the write, or a code 200 refusal such as 1487194 whose cleanup deletes Meta refused with 2490591 or 4841020.

Meta may still accept the campaign and ad set and refuse only the ad. The message names the ad account, asks for the Advertise or Manage permission on it (or a token granted `ads_management`, by reconnecting) and lists the objects left behind.

It ends with Meta's `error_user_title`, `error_user_msg` and subcode; the raw error stays in `platformError`.

  - **stage** `string`: Meta ad create failures only. The step that failed:

- `media`: image/video download or upload.
- `campaign`
- `adset`
- `creative`
- `ad`: the ad POST itself, where Meta's code 31 / 3858385 hold and 100 / 1359188 payment rejections land.
- `activation`: switching the created objects on. No longer returned: a refused switch to ACTIVE now answers 201 with an `activation_failed:` warning and the objects kept PAUSED.
- `other`: a read or check before any write.
 - one of: media, campaign, adset, creative, ad, activation, other
  - **adAccountId** `string`: Meta ad create failures only. The ad account the request wrote to (`act_...`).
  - **createdObjects** `array`: Meta ad create failures only. Every object this request created before failing, in creation order. Objects you referenced (an existing campaign, ad set, creative or video) are never listed and never deleted.
  - **unconfirmedWrite** `object`: Meta ad create failures only. Set when Meta answered a create with a 5xx or a non-JSON body, or dropped the connection after the request was sent, and reading the parent back by name did not settle it. Zernio did not retry it.

One of these left it open:

- The read-back found several objects of the same name.
- The parent could not be read, or the object is a creative, which has no reliable read-back.
- The read-back found no such object, after a dropped connection, a non-JSON body, a 5xx with `retryOnServerError: false`, or a 5xx on a create whose own body is `status: ACTIVE`.

  - **quotaExhausted** `boolean`: Google Ads and YouTube Analytics 429 only. True when the upstream Google quota is spent rather than a Zernio limit.
  - **quotaScope** `string`: Google Ads and YouTube Analytics 429 only, when the scope is known. DEVELOPER is the shared budget (the developer token for Google Ads, the Google Cloud project for YouTube Analytics); ACCOUNT is your ad account (Google Ads only). - one of: DEVELOPER, ACCOUNT
  - **budgetScope** `string`: Zernio Google Ads burst-limit 429 only (never set alongside `quotaExhausted`). `account` is the limit of 15 requests per minute per connected Google Ads account; `user` is the ceiling of 120 requests per minute per Zernio user across all their Google Ads accounts. Both clear within a minute. - one of: account, user

## TikTokPlatformData

Photo carousels up to 35 images. Video titles up to 2200 chars, photo titles truncated to 90 chars.
privacyLevel must match creator_info options. Both camelCase and snake_case accepted.

Creator Inbox (draft mode): Set draft: true to send content to the TikTok Creator Inbox
instead of publishing immediately. The creator receives an inbox notification and completes
the post using TikTok's editing flow. This maps to TikTok's post_mode: "MEDIA_UPLOAD" internally.

Important: The field publish_type is NOT supported. Use draft: true for Creator Inbox flow.

Photo drafts use the /v2/post/publish/content/init/ endpoint with post_mode: "MEDIA_UPLOAD".
Video drafts use the dedicated /v2/post/publish/inbox/video/init/ endpoint.

When draft: true, the video.upload scope is required. When draft is false or omitted
(direct post), the video.publish scope is required. For Creator Inbox, TikTok app version
must be 31.8 or higher.


### Properties

- **draft** `boolean`: When true, sends the post to the TikTok Creator Inbox as a draft instead of publishing immediately. The creator gets an inbox notification to complete posting via TikTok's editing flow.

- true: maps to TikTok API post_mode: "MEDIA_UPLOAD" (photos) or the dedicated inbox endpoint (videos).
- false or omitted: publishes directly via post_mode: "DIRECT_POST".

publish_type is not a supported field; use this field instead.

- **privacyLevel** `string`: One of the values returned by the TikTok creator info API for the account. Accounts connected through the TikTok for Business app publish videos as public only: a non-public value on a video post is rejected at creation unless draft is true (photo posts keep every level).
- **allowComment** `boolean`: Allow comments on the post
- **allowDuet** `boolean`: Allow duets (required for video posts)
- **allowStitch** `boolean`: Allow stitches (required for video posts)
- **commercialContentType** `string`: Type of commercial content disclosure. Sufficient on its own: "brand_organic"
("Your Brand") implies isBrandOrganicPost and "brand_content" ("Branded Content",
paid partnership) implies brandPartnerPromote, so you don't need to send the
boolean flags separately. Branded content cannot be posted with privacyLevel
SELF_ONLY.
 - one of: none, brand_organic, brand_content
- **brandPartnerPromote** `boolean`: Whether the post promotes a brand partner (branded content / paid partnership).
Only needed to disclose BOTH types at once (set it alongside
commercialContentType "brand_organic"), or to override the value implied by
commercialContentType.

- **isBrandOrganicPost** `boolean`: Whether the post promotes the creator's own brand (brand organic). Only needed
to disclose BOTH types at once (set it alongside commercialContentType
"brand_content"), or to override the value implied by commercialContentType.

- **contentPreviewConfirmed** `boolean`: User has confirmed they previewed the content
- **expressConsentGiven** `boolean`: User has given express consent for posting
- **mediaType** `string`: Optional override. Defaults based on provided media items. - one of: video, photo
- **videoCoverTimestampMs** `integer`: Optional for video posts. Timestamp in milliseconds to select which frame to use as thumbnail (defaults to 1000ms/1 second). Ignored when the videoCoverImageUrl image becomes the cover, and used when Zernio skips that image (see videoCoverImageUrl). (min: 0)
- **videoCoverImageUrl** `string`: Optional for video posts. URL of a custom thumbnail image (JPG, PNG, or WebP, max 20MB). Any downloadable URL works: we rehost it ourselves. Overrides videoCoverTimestampMs when provided.

The image is stitched as a single frame at the start of the video to serve as the cover.

When the image shape is far from the video shape (it would fill less than half of the frame, for example a landscape cover on a vertical video), or the stitch fails, Zernio skips the image and TikTok uses videoCoverTimestampMs.

Accounts connected through the TikTok for Business app instead hand it to TikTok as the cover, with no stitching, falling back to videoCoverTimestampMs without it.

- **photoCoverIndex** `integer`: Optional for photo carousels. Index of image to use as cover, 0-based (defaults to 0/first image). (min: 0)
- **autoAddMusic** `boolean`: When true, TikTok may add recommended music (photos only). With the brand-organic or branded-content toggle on, TikTok allows Commercial Music Library tracks only, so this attaches nothing there; use musicSoundInfo instead.
- **musicSoundInfo** `object`: Commercial Music Library track to attach. Accounts connected through the TikTok for Business app only: a developer-app account rejects the post at publish time with a message that says so. Pick musicSoundId from GET /v1/accounts/{accountId}/tiktok/commercial-music. Ignored on drafts, where TikTok ignores every post_info field.
  - **musicSoundId** `string`: The clip.id of a track from GET /v1/accounts/{accountId}/tiktok/commercial-music (its id publishes too, but viewers may see the sound as unavailable in their country; observed from Germany). TikTok fails the publish with a generic 51065 when given the commercial music id instead.
  - **musicSoundVolume** `integer`: Track volume. TikTok defaults an omitted volume to 0, which publishes the track silently, so we default to the app's 50. Video posts only.
  - **musicSoundStart** `integer`: Start point of the track in milliseconds (default 0). Video posts only.
  - **musicSoundEnd** `integer`: End point of the track in milliseconds (default: the video length). Must be greater than musicSoundStart. Video posts only.
- **videoOriginalSoundVolume** `integer`: Volume of the video's own sound when a commercial track is attached (0 to 100). Requires musicSoundInfo. Video posts only. Omitted, TikTok keeps its API default of 0 and the video's own audio is muted under the track (the TikTok app uses 50). (min: 0) (max: 100)
- **videoMadeWithAi** `boolean`: Set true to disclose AI-generated content.

Accounts connected through the TikTok for Business app carry the disclosure on video posts only. The business photo endpoint has no AI disclosure field, so true on a direct photo post is rejected at creation rather than published undisclosed.

To publish such a photo post, send draft true and set the disclosure in the TikTok app.

- **locationId** `string`: Location tag to attach, as the id of a result from GET /v1/accounts/{accountId}/tiktok/locations. Requires locationName. Ignored on drafts, where TikTok ignores every post_info field.

Accounts connected through the TikTok for Business app and video posts only:

- A developer-app account rejects the post at publish time with a message that says so.
- A direct photo post is rejected at creation, since the business photo endpoint has no location field.

- **locationName** `string`: Display name of the location tag, as returned next to its id. Required with locationId; a locationId without it is rejected at creation.
- **isAdsOnly** `boolean`: Set true to publish the video as an "Only show in ads" post: it is kept off the profile and exists to be used as a Spark Ad. Accounts connected through the TikTok for Business app and video posts only, with the same rejections as locationId. Ignored on drafts.
- **description** `string`: Optional long-form caption for photo posts (max 4000 chars). Recommended when content exceeds 90 chars, as photo titles are auto-truncated. Falls back to the post content when omitted. (max: 4000)

## FacebookSettings

Facebook options that must be nested under platformSpecificData.facebookSettings, or sent at the request root as facebookSettings. The remaining Facebook options sit directly on platformSpecificData, see FacebookPlatformData.


### Properties

- **draft** `boolean`: When true, creates the post as a draft in Facebook Publishing Tools instead of publishing immediately. Supported for feed posts (text, link, image, video) and reels. Not supported for stories. Drafts expire after ~30 days. (default: false)
- **carouselCards** `array`: Renders the post as a multi-link carousel (organic Page post). Mutually exclusive with contentType=story|reel.

- mediaItems must be provided with the same length, and all items must be images (no videos).
- Each cards[i] adds the click-through link and headline for the image at mediaItems[i].
- Facebook truncates name at ~35 chars and description at ~30 chars on render; longer strings are accepted.

- **carouselLink** `string`: Optional top-level "See more" destination shown on the carousel end card. Defaults to the first card's link when omitted. Only used together with carouselCards.

- **textFormatPresetId** `string`: Facebook-defined preset ID that renders the post as large text on a colored background (Graph `text_format_preset_id`). Supply the raw numeric ID from Meta; we do not publish a catalog of presets and Facebook may change the available set.

Pages only (ignored on personal profiles and groups), and text-only feed posts only. Rejected with 400 when mediaItems or carouselCards are present, when contentType is story or reel, or when content is empty. An attachment makes Facebook drop the background silently, so those are rejected up front.

Length is NOT rejected: Facebook's composer stops offering a background at around 130 characters, but Meta documents no API limit, so longer content publishes and returns a warning instead.

A URL detected in the content is NOT attached as a link preview while a preset is set, because a link attachment also makes Facebook drop the background.


## PostUpdateResponse

### Properties

- **message** `string`: No description
- **post**: No description
- **warnings** `array`: No description

## PostPublishIncompleteResponse

Body of the 207 returned by createPost and updatePost when the post was saved but the inline publish did not fully succeed. Read `post.status` to tell the three outcomes apart.

### Properties

- **post**: No description
- **message** `string`: Human-readable summary of the publish outcome.
- **error** `string`: Present when no platform published. Absent on a partial success. Informational only; the per-platform detail is in `platformResults` and in `post.platforms[]`.
- **platformResults** `array`: Per-platform outcome of the publish attempt. Omitted when the attempt aborted before producing per-platform results (for example the post was already being processed); read `post.platforms[]` in that case.
- **warnings** `array`: Advisory notices about the post that was still created. Absent when there are none.

## BalanceRequiredError

The error envelope of a $0 balance refusal (402 `insufficient_balance` or `usage_limit_reached`), plus where to fund the balance.


## PostDeleteResponse

### Properties

- **message** `string`: No description